TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 333
tacacs-server host, Description, Syntax, Parameter, Command Mode, User Guidelines
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide tacacs-server host Description The tacacs-server host command is used to configure a new TACACS+ server. To delete the specified TACACS+ server, please use no tacacs-server host command. Syntax tacacs-server host ip-address [ port port-id ] [ timeout time ] [ key { [ 0 ] string | 7 encryped-string } ] no tacacs-server host ip-address Parameter ip-address -- Specify the IP address of the TACACS+ server. port-id -- Specify the server's port number for AAA. By default it is 49. time -- Specify the time in seconds the switch waits for the server's response before it times out. The time ranges from 1 to 9 seconds. The default is 5 seconds. [ 0 ] string | 7 encrypted-string -- 0 and 7 are the encryption type. 0 indicates that an unencrypted key will follow. 7 indicates that a symmetric encrypted key with a fixed length will follow. By default, the encryption type is 0. "string" is the shared key for the switch and the authentication servers to exchange messages which contains 31 characters at most. The question marks and spaces are not allowed. "encrypted-string" is a symmetric encrypted key with a fixed length, which you can copy from another switch's configuration file. The key or encrypted-key you configured here will be displayed in the encrypted form. Always configure the key as the last item of this command. Command Mode Global Configuration Mode User Guidelines The TACACS+ servers you configured are added in the server group "tacacs" by default. 316