TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 307
Command Mode, Example
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide port - - String for the port on which the Alarm entry acts, format as module/slot/port, for example 1/0/24. alarm-variable -- The alarm variable. By default, the option is drop. s-type -- Sample Type, which is the sampling method for the selected variable and comparing the value against the thresholds. There are two options, absolute and delta. Absolute indicates comparing the values directly with the thresholds at the end of the sampling interval. Delta indicates subtracting the last sampled value from the current value, and then comparing the difference in the values with the threshold. By default, the Sample Type is absolute. r-hold -- The rising counter value that triggers the Rising Threshold alarm, ranging from 1 to 65535. By default, it is 100. r-event -- Rise Event, which is the index of the corresponding event which will be triggered if the sampled value is larger than the Rising Threshold. It ranges from 1 to 12. f-hold -- The falling counter value that triggers the Falling Threshold alarm, ranging from 1 to 65535. By default, it is 100. f-event -- Fall Event, which is the index of the corresponding event which will be triggered if the sampled value is lower than the Falling Threshold. It ranges from 1 to 12. a-type -- Alarm Type, with rise, fall and all options. Rise indicates that the alarm event will be triggered when the sampled value exceeds the Rising Threshold, fall indicates that the alarm event will be triggered when the sampled value is under the Falling Threshold, and all indicates that the alarm event will be triggered either the sampled value exceeds the Rising Threshold or is under the Falling Threshold. By default, the Alarm Type is all. owner-name -- The owner of the entry, ranging from 1 to 16 characters. By default, it is monitor. interval -- The alarm interval time, ranging from 10 to 3600 in seconds. By default, it is 1800. Command Mode Global Configuration Mode Example Configure the ports of entries of 1-3 as Gi1/0/2, the owners as owner1 and the alarm intervals as 100 seconds: 290