TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 260
ip igmp snooping multi-vlan-config
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
T2500-28TC JetStream L2 Managed Switch CLI Guide the format of 1/0/2; Gigabit Ethernet port, ranging from 1-4, in the format of 1/0/2. vlan-id -- The VLAN ID of the multicast IP, ranging from 1 to 4094. ip -- The static multicast IP address. port-list -- The forward port list of the multicast group. Command Mode Global Configuration Mode Example Enable the IGMP Snooping function and modify Member Port Time as 200 seconds for VLAN1-3: T2500-28TC(config)#ip igmp snooping vlan-config 1-3 mtime 200 ip igmp snooping multi-vlan-config Description The ip igmp snooping multi-vlan-config command is used to create and configure a Multicast VLAN. To delete the corresponding Multicast VLAN, please use no ip igmp snooping multi-vlan-config command. Syntax ip igmp snooping multi-vlan-config [vlan-id] { rtime router-time | mtime member-time | ltime leave-time | rport interface { fastEthernet port | gigabitEthernet port } } no ip igmp snooping multi-vlan-config Parameter vlan-id -- The ID of the VLAN desired to modify configuration, ranging from 2 to 4094. router-time -- Router Port Time. Within this time, if the switch does not receive IGMP query message from the router port, it will consider this port is not a router port any more. Router Port Time ranges from 60 to 600 in seconds. By default, it is 300. member-time -- Member Port Time. Within this time, if the switch does not receive IGMP report message from the member port, it will consider this port is not a member port any more. Member Port Time ranges from 60 to 600 in seconds. By default, it is 260. 243