TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 CLI Reference Guide - Page 18

T2500-28TC JetStream L2 Managed Switch CLI Guide Preface This Guide is intended for network administrator to provide referenced information about CLI (Command Line Interface). The device mentioned in this Guide stands for T2500-28TC 24-Port 10/100Mbps + 4-Port Gigabit JetStream L2 Managed Switch. When using this guide, please notice that features of the switch may vary slightly depending on the model and software version you have, and on your location, language, and Internet service provider. All parameters and descriptions documented in this guide are used for demonstration only. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Users must take full responsibility for their application of any products. Overview of this Guide Chapter 1: Using the CLI Provide information about how to use the CLI, CLI Command Modes, Security Levels and some Conventions. Chapter 2: User Interface Provide information about the commands used to switch between five CLI Command Modes. Chapter 3: IEEE 802.1Q VLAN Commands Provide information about the commands used for configuring IEEE 802.1Q VLAN. Chapter 4: MAC-based VLAN Commands Provide information about the commands used for configuring MAC-Based VLAN. Chapter 5: Protocol-based VLAN Commands Provide information about the commands used for configuring Protocol-based VLAN. Chapter 6: VLAN-VPN Commands Provide information about the commands used for configuring VLAN-VPN (Virtual Private Network) function. Chapter 7: Voice VLAN Commands Provide information about the commands used for configuring Voice VLAN. Chapter 8: Private VLAN Commands Provide information about the commands used for configuring Private VLAN. Chapter 9: GVRP Commands 1