TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 145
Multicast, IGMP Snooping, Querier Config, IGMP Snooping Querier Config, VLAN ID, Query Interval
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Choose the menu Multicast→IGMP Snooping→Querier Config to load the following page. Figure 9-8 Packet Statistics The following entries are displayed on this screen: IGMP Snooping Querier Config VLAN ID: Query Interval: Enter the ID of the VLAN that enables IGMP Snooping Querier. Enter the time interval of sending a general query frame by IGMP Snooping Querier. Max Response Time: Enter the maximal time for the host to respond to a general query frame sent by IGMP Snooping Querier. General Query Source IP: Enter the source IP of the general query frame sent by IGMP Snooping Querier. It should not be a multicast IP or a broadcast IP. Last Listener Query Interval: Enter the time interval of sending specific query frames by IGMP Snooping Querier. A specific query will be sent on condition that "fast-leave" is not enabled and a leave frame is received. Last Listener Query Count: Enter the times of sending specific query frames by IGMP Snooping Querier. At receiving a leave frame, a specific query frame will be sent by IGMP Snooping Querier. If a report frame is received before sending specific frames number reaches "Last Member Query Times", the switch will still treat the port as group member and stop sending specific query frames to the port, otherwise the port will be removed from forward-ports of the IP multicast group. Special Query Source IP: Enter the source IP of the specific query frame sent by IGMP Snooping Querier. It should not be a multicast IP or a broadcast IP. IGMP Snooping Querier Table Select: Select the desired entry. It is multi-optional. 133