TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 300
ACL Config, IP ACL, Create Extend-IP Rule, Permit, ACL ID, Rule ID, Operation, IP Protocol, TCP Flag
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
Choose the menu ACL→ACL Config→Extend-IP ACL to load the following page. Figure 13-8 Create Extend-IP Rule The following entries are displayed on this screen: Create Extend-IP Rule ACL ID: Select the desired Extend-IP ACL for configuration. Rule ID: Enter the rule ID. Operation: S-IP: Select the operation for the switch to process packets which match the rules. Permit: Forward packets. Deny: Discard Packets. Enter the source IP address contained in the rule. D-IP: Enter the destination IP address contained in the rule. Mask: Enter IP address mask. If it is set to 1, it must strictly match the address. IP Protocol: Select IP protocol contained in the rule. TCP Flag: Configure TCP flag when TCP is selected from the pull-down list of IP Protocol. S-Port: Configure TCP/IP source port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. D-Port: Configure TCP/IP destination port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. DSCP: Enter the DSCP information contained in the rule. IP ToS: Enter the IP ToS contained in the rule. 288