TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 386
Application Example for Cluster Function, Operation, Description, Cluster, NTDP Config
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 386 highlights
Step Operation Description 2 Enable the NTDP function Optional. On Cluster→NTDP→NTDP Config page, enable globally and for the port, the NTDP function on the switch. and then configure NTDP parameters 3 Manually collect NTDP Optional. On Cluster→NTDP→Device Table page, click the information Collect Topology button to manually collect NTDP information. Or On Cluster→Cluster→Cluster Topology page, click the Collect Topology button to manually collect NTDP information. 4 View the detailed Optional. On Cluster→Cluster→Cluster Topology page, information of other double-click the icon of the switch to view its detailed switches in the cluster. information. 17.4 Application Example for Cluster Function Network Requirements Three switches form cluster, one commander switch and two member switches. The administrator manages all the switches in the cluster via the commander switch. Port 1 of the commander switch is connecting to the external network, port 2 is connecting to member switch 1 and port 3 is connecting to member switch 2. IP pool: 175.128.0.1, Mask: 255.255.255.0. Network Diagram Figure17-19 Network diagram 374