TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 57
Application Example for Stack, Stack, Management, Switch Renumber, Network Requirements
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Choose the menu Stack Management→Switch Renumber to load the following page. Figure 5-9 Switch Renumber The following entries are displayed on this screen: Switch Renumber Select: Current Unit: Designated Unit: Role: MAC Address: Select the desired entry. It is multi-optional. Displays the current unit number of the member switch. Configure the unit number of the member switch. • Auto: With this option selected, the member switch will be assigned a free unit number automatically. • 0-7: With this option selected, the member switch will be assigned this unit number if it has not been used by the other members, otherwise the member switch will be assigned a free unit number automatically. Only the unused unit number is available for you to choose from. The role of the device in a stack. Displays the MAC address of the member switch. 5.2 Application Example for Stack Network Requirements Establish a stack of ring topology with four T2700-28TQ switches. Network Diagram 45