TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 71
Switching, Global Config, LACP Config, System Priority, Select, Admin Key, Port Priority
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Choose the menu Switching→LAG→LACP Config to load the following page. Figure 6-11 LACP Config The following entries are displayed on this screen: Global Config System Priority: Specify the system priority for the switch. The system priority and MAC address constitute the system identification (ID). A lower system priority value indicates a higher system priority. When exchanging information between systems, the system with higher priority determines which link aggregation a link belongs to, and the system with lower priority adds the proper links to the link aggregation according to the selection of its partner. LACP Config UNIT: Select the unit ID of the desired member in the stack. Select: Select the desired port for LACP configuration. It is multi-optional. Port: Admin Key: Displays the port number. Specify an Admin Key for the port. The member ports in a dynamic aggregation group must have the same Admin Key. Port Priority: Specify a Port Priority for the port. This value determines the priority of the port to be selected as the dynamic aggregation group 59