TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 259
Application Example for PIM DM
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Step Operation 4 Enable IGMP Description Required. Enable IGMP on the routing interfaces which connect to the receivers on Multicast Routing→IGMP→Interface Config page. 11.3.3 Application Example for PIM DM Network Requirements 1. Receivers receive VOD data through multicast. The whole network runs PIM DM as multicast routing protocol. 2. Host A and Host D act as multicast receivers. 3. Switch A connects to Switch B in VLAN 2, connects to Switch C in VLAN 3. The Source server connects to Switch A in VLAN 1. 4. Host A and B connect to Switch B in VLAN 4. Host C and D connect to Switch C in VLAN 5. 5. The VLAN interfaces connecting to hosts run IGMP protocol. Network Diagram The IP addresses of VLAN interfaces in each switch are displayed below: Switch A: VLAN interface 1: 192.168.1.2/24 VLAN interface 2: 192.168.2.2/24 VLAN interface 3: 192.168.3.2/24 Switch B: VLAN interface 2: 192.168.2.100/24 VLAN interface 4: 192.168.4.100/24 Switch C: VLAN interface 3: 192.168.3.100/24 VLAN interface 5: 192.168.5.100/24 247