TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 217
Route Redistribution, Transmit Delay, Authentication, State, Process, Select, Source
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Transmit Delay: Authentication Type: Authentication Key: The Transit Delay for the specified interface. This specifies the estimated number of seconds it takes to transmit a link state update packet over the selected interface. The valid value ranges from 1 to 65535 seconds and the default is 1 second. You may select an authentication type other than none by clicking on the 'Authentication Type' button. The choices are: default: Uses the authentication type of the backbone area. null: No authentication. simple: Uses simple password. md5: Uses md5 message-digest algorithm. Displays the active authentication key of the interface. Authentication Key ID: State: Displays the active authentication key ID of the interface. Displays the current state of the selected router interface. One of: Down: This is the initial interface state. In this state, the lower-level protocols have indicated that the interface is unusable. In this state, interface parameters will be set to their initial values. All interface timers will be disabled, and there will be no adjacencies associated with the interface. P2P: In this state, the interface is operational, and connects either to a physical point-to-point network or to a virtual link. Upon entering this state, the router attempts to form an adjacency with the neighboring router. Hello Packets are sent to the neighbor every HelloInterval seconds. 10.9.8 Route Redistribution Choose the menu Routing→OSPF→Route Redistribution to load the following page. Figure10-53 Route Redistribution The following entries are displayed on this screen: Route Redistribution Process: Select: Source: Redistribute: Select one OSPF Process to display its route redistribution list. Select the desired item for configuration. It is multi-optional. The available source routes for redistribution by OSPF. The valid values are 'Static', 'RIP', and other OSPF processes. This option enables or disables the redistribution for the selected source protocol. 205