TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 364
Port Config, LLDP-MED Parameters Config, LLDP-MED, Port Config, Enable, Disable
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
The following entries are displayed on this screen: LLDP-MED Parameters Config Fast Start Count: Device Class: When LLDP-MED fast start mechanism is activated, multiple LLDP-MED frames will be transmitted (the number of frames equals this parameter). The default value is 4. LLDP-MED devices are comprised of two primary device types: Network Connectivity Devices and Endpoint Devices. In turn, Endpoint Devices are composed of three defined Classes: Class I, Class II and Class III. Bridge is a Network Connectivity Device. 16.4.2 Port Config On this page you can configure all ports' LLDP-MED parameters. Choose the menu LLDP→LLDP-MED→Port Config to load the following page. Figure 16-7 LLDP-MED Port Configuration The following entries are displayed on this screen: LLDP-MED Port Config Select: LLDP-MED Status: Included TLVs: Select the desired port to configure. Configure the port's LLDP-MED status: • Enable: Enable the port's LLDP-MED status, and the port's Admin Status will be changed to Tx&Rx. • Disable: Disable the port's LLDP-MED status. Select TLVs to be included in outgoing LLDPDU. 352