TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 376
NTDP Config, NTDP Interval Time, NTDP Hops, NTDP Hop Delay, Selected Ports
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
The following entries are displayed on this screen: Global Config NTDP: NTDP Interval Time: NTDP Hops: NTDP Hop Delay: NTDP Port Delay: Displays the NTDP status (enabled or disabled) of the switch globally. Displays the interval to collect topology information. Displays the hop count the switch topology collects. Displays the time between the switch receiving NTDP request packets and the switch forwarding NTDP request packets for the first time. Displays the time between the port forwarding NTDP request packets and its adjacent port forwarding NTDP request packets over. Port Status UNIT: Selected Port(s): Unselected Port(s): Select the unit ID of the desired member in the stack. Selected Port means NTDP function of the port is enabled. Unselected Port means NTDP function of the port is disabled. 17.2.3 NTDP Config On this page you can configure NTDP globally. Choose the menu Cluster→NTDP→NTDP Config to load the following page. Figure17-8 NTDP Config The following entries are displayed on this screen: Global Config NTDP: Select Enable/Disable NTDP for the switch globally. 364