TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 334
Radius Server, Control Mode, Authorized, Primary IP, Secondary IP
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
Control Mode: Control Type: Authorized: LAG: Specify the Control Mode for the port. • Auto: In this mode, the port will normally work only after passing the 802.1X Authentication. • Force-Authorized: In this mode, the port can work normally without passing the 802.1X Authentication. • Force-Unauthorized: In this mode, the port is forbidden working for its fixed unauthorized status. Specify the Control Type for the port. • MAC Based: Any client connected to the port should pass the 802.1X Authentication for access. • Port Based: All the clients connected to the port can access the network on the condition that any one of the clients has passed the 802.1X Authentication. Displays the authentication status of the port. Displays the LAG to which the port belongs to. 14.6.3 Radius Server RADIUS (Remote Authentication Dial-In User Service) server provides the authentication service for the switch via the stored client information, such as the user name, password, etc, with the purpose to control the authentication and accounting status of the clients. On this page, you can configure the parameters of the authentication server. Choose the menu Network Security→802.1X→Radius Server to load the following page. Figure 14-24 Radius Server The following entries are displayed on this screen: Authentication Config Primary IP: Enter the IP address of the authentication server. Secondary IP: Enter the IP address of the alternate authentication server. 322