TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 213
Area, Process ID, Area ID, Area Description, Area Type, Authentication, Default Cost, Summary
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
10.9.5 Area Choose the menu Routing→OSPF→Area to load the following page. Figure10-50 OSPF Area The following entries are displayed on this screen: Area Config Process ID: Area ID: Area Description: Area Type: Authentication Type: Default Cost: Summary: Redistribution: Default Route Advertise: Select the desired OSPF process for configuration. The 32 bit unsigned integer that uniquely identifies the area. It can be in decimal format or dotted decimal format. One simple string to describe the area. No more than 20 characters. OSPF area type: Normal, Stub, or NSSA. The authentication type of the area. All the interfaces that belong to such area will have the same authentication type by default. null: No authentication. simple: Uses simple password. md5: Uses md5 message-digest algorithm. The metric value you want to apply for the default Summary-LSA advertised into the stub area. The valid value ranges from 1 to 16777214. Set whether or not the specified Area will allow Summary Link-State Advertisements (Summary LSAs) to be imported into the area from other areas. It is always Enable in Normal areas. The default is Enable. Set whether or not the external routes will be redistributed to the area. It is always Enable in Normal areas and always Disable in Stub areas. Enable or disable advertising default route (0.0.0.0/0.0.0.0) into NSSA area by sending a NSSA-External LSA. It is only available in NSSA area. 201