TP-Link T2700G-28TQ T2700G-28TQ User Guide V1 - Page 222
Network Diagram, Configuration Procedure, Operation, Description, Routing, Interface Config, Process
View all TP-Link T2700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Network Diagram Configuration Procedure Configure Switch A Step Operation Description 1 Create routing interfaces and their IP addresses Required. On page Routing→Interface→Interface Config, create routed port 1/0/1 with the IP 1.10.1.1/24 and routed port 1/0/2 with the IP 1.20.1.1/24. 2 Create OSPF process Required. On page Routing→OSPF→Process, Create OPSF process 1 and configure the Router ID as 1.1.1.1. 3 Create networks Required. On page Routing→OSPF→Network, configure network in the area 1.10.1.0/24 in area 0 and configure network 1.20.1.0/24 in area 1. 4 Configure area Optional. On page Routing→OSPF→Area Aggragation, configure the aggregation aggregation address as 1.20.0.0/16 in area 1. Configure Switch B Step Operation Description 1 Create routing interfaces and their IP addresses Required. On page Routing→Interface→Interface Config, create routed port 1/0/1 with the IP 1.10.1.2/24 and routed port 1/0/2 with the IP 1.30.1.1/24. 2 Create OSPF process Required. On page Routing→OSPF→Process, Create OPSF process 1 and configure the Router ID as 2.2.2.2. 3 Create networks Required. On page Routing→OSPF→Network, configure network in the area 1.10.1.0/24 in area 0 and configure network 1.30.1.0/24 in area 2. 4 Configure area Optional. On page Routing→OSPF→Area Aggragation, configure the aggregation aggregation address as 1.30.0.0/16 in area 2. 210