Yamaha RXV1800 Owner's Manual - Page 14
Step 3: Turn on the power and start, playback, MAIN ZONE ON/OFF - speaker recommendations
![]() |
UPC - 027108928463
View all Yamaha RXV1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Quick start guide Step 3: Turn on the power and start playback Check the type of the connected speakers. If the speakers are 6-ohm speakers, set "SPEAKER IMP." to "6Ω MIN" before using this unit (see page 33). You can also use 4-ohm speakers as the front speakers (see page 117). 4 Start playback of the desired DVD on your player. 5 Rotate QVOLUME to adjust the volume. 1 Turn on the video monitor connected to this unit. 2 Press AMASTER ON/OFF inward to the ON position on the front panel. ■ After using this unit... Press BMAIN ZONE ON/OFF to set this unit to the standby mode. 3 Rotate the CINPUT selector to set the input source to "DVD". y • The recommended sound field program is set for each input source (DVD, etc.). You can also use various sound field programs and other sound modes for playback. Refer to the following pages for details: - see pages 46 to 50 to use various sound field programs - see page 51 to turn on or off the sound effect - see page 52 to use the pure direct mode for high fidelity sound • You can also set the input source to "TUNER" to use the FM/AM tuning feature. For information on the FM/AM tuning, see pages 54 to 57. This unit is set to the standby mode and consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby mode, press BMAIN ZONE ON/OFF on the front panel (or 8POWER on the remote control). See page 33 for details. 10 En
![](/manual_guide/products/yamaha-rxv1800-owners-manual-d03d3ad/14.png)