Yamaha RXV1800 Owner's Manual - Page 57

BASIC OPERATION Using audio features Before performing the following operation, set the operation mode selector on the remote control to CAMP. Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. Note This operation will override the level adjustments made in "Optimizing the speaker setting for your listening room" (see page 37) and "SPEAKER LEVEL" (see page 82). 1 Press 2LEVEL on the remote control repeatedly to select the speaker you want to adjust. Enjoying multi-channel sources in 2-channel stereo You can mix down multi-channel sources to 2 channels and enjoy playback in 2-channel stereo. Press NSTEREO on the remote control repeatedly to select "2ch Stereo". y • You can use a subwoofer with this program when "LFE/BASS OUT" is set to "SWFR" or "BOTH" (see page 80). • You can also select the "2ch Stereo" mode by rotating the NPROGRAM selector on the front panel. • See page 72 for details about the parameters of the "2ch Stereo" mode. Display Adjusted speaker FRONT L Front left speaker CENTER Center speaker FRONT R Front right speaker SUR.R Surround right speaker SB R Surround back right speaker SB L Surround back left speaker SUR.L Surround left speaker SWFR Subwoofer PRNS L Presence left speaker PRNS R Presence right speaker y • Once you press 2LEVEL on the remote control, you can also select the speaker by pressing 3k / n. • Instead of "SB R" and "SB L", "SB" is displayed if "SUR. B L/R SP" is set to either "SMLx1" or "LRGx1" (see page 81). 2 Press 3l / h on the remote control to adjust the speaker output level. • Press 3h to increase the value. • Press 3l to decrease the value. Control range: -10.0 dB to +10.0 dB English 53 En