Yamaha RXV1800 Owner's Manual - Page 95

[ [ p p 5 OPTION MENU Use this menu to adjust the optional system parameters. 5 OPTION MENU . A)DISPLAY SET B)VIDEO SET C)MEMORY GUARD D)INIT. CONFIG E)ZONE SET [ ]/[ ]: UP/DOWN [ENTER]: Enter ■ Display settings A)DISPLAY SET Note Use "VIDEO" of "INITIALIZE" in "ADVANCED SETUP" to set "OSD SHIFT" and "GRAY BACK" to the factory presets (see page 120). A)DISPLAY SET . DIMMER;;;;;;;;;;;;0 OSD SHIFT;;;;;;;;+5 GRAY BACK;;;;;;AUTO SHORT MESSAGE;;;;ON ON SCREEN;;;;ALWAYS FL SCROLL;;;;;;CONT [ ]/[ ]: UP/DOWN [p]/[[]: Adjust Dimmer DIMMER Use this feature to adjust the brightness of the front panel display. Control range: - 4 to 0 Control step: 1 • Press 3l to make the front panel display dimmer. • Press 3h to make the front panel display brighter. OSD shift OSD SHIFT Use this feature to adjust the vertical position of the OSD. Control range: -5 (downward) to +5 (upward) Control step: 1 Initial setting: 0 • Press 3l to lower the position of the OSD. • Press 3h to raise the position of the OSD. Customizing this unit (MANUAL SETUP) Gray back GRAY BACK Use this feature to display a gray background in your video monitor when there is no video signal being input. Choice Functions AUTO Displays a gray background on your video monitor when there is no video signal being input. OFF Does not display a gray background on your video monitor. Notes • Depending on the video signals being input or the system setting of your video monitor (NTSC or PAL), the OSD may be displayed abnormally. In such cases, set "GRAY BACK" to "OFF". • Even when "GRAY BACK" is set to "OFF", the OSD may not be displayed correctly depending on the conditions of the picture. Short message display SHORT MESSAGE Use this feature to activate or deactivate the short message display function. Choice Functions ON Activates the short message display function. The contents of the front panel display appear at the bottom of the screen each time you operate this unit. OFF Deactivates the short message display function. Note The short message display does not appear in the following cases: - when the component video signals with 480p/576p, 720p, 1080i or 1080p resolutions are input - When HDMI video signals are input On-screen display time ON SCREEN Use this feature to set the time for which the XM Satellite Radio information or iPod menu is displayed in the OSD after you perform a certain operation. Choice Functions ALWAYS Displays the OSD unceasingly during an operation. 10S Turns off the OSD 10 seconds after you perform a certain operation. 30S Turns off the OSD 30 seconds after you perform a certain operation. ADVANCED OPERATION English 91 En