Yamaha RXV1800 Owner's Manual - Page 46
BASIC OPERATION, Playback, Basic procedure
![]() |
UPC - 027108928463
View all Yamaha RXV1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Playback Caution Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS. y To play DTS-encoded CDs when using a digital audio connection, set "DECODER MODE" in "INPUT MENU" to "DTS" before the playback (see page 89). Before performing the following operations, set the operation mode selector on the remote control to CAMP. Basic procedure 1 Turn on the video monitor connected to this unit. y • See page 44 to display the input source information. • You can display a gray background in the OSD when there is no video signal being input by setting "GRAY BACK" in "OPTION MENU" to "AUTO" (see page 91). • You can turn on or off the short message displays on the video monitor. See pages 91 for details. 2 Rotate the CINPUT selector (or set the operation mode selector to CAMP and then press one of the input selector buttons (1)) to select the desired input source. The name of the currently selected input source appears in the front panel display and in the OSD for a few seconds. Available input sources V-AUX VCR DVR DTV/CBL DVD BD/HD DVD MD/TAPE CD-R CD PHONO MULTI CH TUNER XM DVD Currently selected input source 3 Start playback on the selected source component or select a broadcast station. • Refer to the instruction manuals for the source component. • See page 54 for details about FM/AM tuning instructions. • See page 58 for details about XM Satellite Radio tuning instruction. 4 Rotate QVOLUME (or press BVOLUME +/-) to adjust the volume to the desired output level. Control range: MUTE, -80.0 dB (minimum) to +16.5 dB (maximum) y See page 53 to adjust the level of each speaker. 5 Rotate the NPROGRAM selector (or press one of the sound field program selector buttons (N) repeatedly) to select the desired sound field program. The name of the selected sound field program appears in the front panel display and in the OSD. See page 46 for details about sound field programs. Currently selected sound field program category Movie Sci-Fi Currently selected sound field program Note Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 43). y • Choose a sound field program based on your listening preference, not merely on the name of the program. • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • To display information about the currently selected input source in the OSD, see page 44 for details. 42 En
![](/manual_guide/products/yamaha-rxv1800-owners-manual-d03d3ad/46.png)