Yamaha RXV1800 Owner's Manual - Page 85
speakers are small, When the single surround back speaker is
UPC - 027108928463
View all Yamaha RXV1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
ADVANCED OPERATION Measure for the speaker size The woofer section of a speaker is - 16 cm (6.5 in) or larger: large - smaller than 16 cm (6.5 in): small Surround left/right speakers SUR. L/R SP Choices: NONE, SMALL, LARGE A)SPEAKER SET SUR. L/R SP NONE >SMALL LARGE When the surround speakers are large: Select "LARGE" (large). When the surround speakers are small: Select "SMALL" (small). When you do not use the surround speakers: Select "NONE" (none). This unit is set to the Virtual CINEMA DSP mode (see page 51), and "SUR.B L/R SP" is automatically set to "NONE". y See page 17 for the connection information of the surround back speakers. Surround back left/right speakers SUR.B L/R SP Choices: NONE, SMLx1, SMLx2, LRGx1, LRGx2 A)SPEAKER SET SUR.B L/R SP NONE SMLx1 >SMLx2 When the surround back left and right speakers are large: Select "LRGx2" (large x 2). When the single surround back speaker is large: Select "LRGx1" (large x 1). When the surround back left and right speakers are small: Select "SMLx2" (small x 2). When the single surround back speaker is small: Select "SMLx1" (small x 1). Customizing this unit (MANUAL SETUP) When you do not use the surround back speakers: Select "NONE" (none). The surround back channel signals are directed to the surround left and right speakers. y See page 17 for the connection information of the surround back speakers. Note If the Dolby TrueHD audio signals are input and "SUR.B L/R SP" is set to "NONE", the left and right surround back channels are not directed to the surround left and right speakers. Presence speakers PRESENCE SP Use this feature if you want to use the presence speakers connected to this unit. Choices: NONE, YES A)SPEAKER SET PRESENCE SP NONE >YES When you do not use the presence speakers: Select "NONE" (none). When you use the presence speakers: Select "YES" (yes). Note "DIALOG LIFT" is available only when "PRESENCE SP" is set to "YES". Bass cross over CROSS OVER Use this feature to select the crossover frequency of all the speakers set to "SML" (or "SMALL") or to "NONE" in "SPEAKER SET" (see page 80). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to "LRG" (or "LARGE") in "SPEAKER SET" (see page 80). Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz A)SPEAKER SET CROSS OVER FREQ;;;;80Hz y If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. English 81 En