ZyXEL ARMOR Z1 - Model NBG6816 User Guide - Page 105
IPv6 LAN Screen
View all ZyXEL ARMOR Z1 - Model NBG6816 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Chapter 12 LAN 12.6 IPv6 LAN Screen Use this screen to configure the IP address for your ARMOR Z1 on the LAN. Click Expert > LAN > IPv6 LAN. Figure 68 Expert > LAN > IPv6 LAN The following table describes the labels in this screen. Table 40 Expert > LAN > IPv6 LAN LABEL DESCRIPTION RA period Minimum RA period Enter the minimum time in seconds between router advertisement messages. LAN IPv6 Address Assignment Enable_DHCPv6-PD Select this option to use DHCPv6 prefix delegation. The ARMOR Z1 will obtain an IPv6 prefix from the ISP or a connected uplink router for the LAN. Autoconfiguration Type Select SLAAC + RDNSS to enable IPv6 stateless auto-configuration on this interface. The interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in the network. Select SLAAC + Stateless DHCPv6 to enable IPv6 stateless auto-configuration on this interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The IP address information gets through DHCPv6. IPv6 Address range (Start) IPv6 Address range (End) IPv6 Lifetime Static IP Address Select Stateful DHCPv6 to allow a DHCP server to assign and pass IPv6 network addresses, prefixes and other configuration information to DHCP clients. Enter the beginning of the range of IP addresses that this address object represents. Enter the end of the range of IP address that this address object represents. Enter the IPv6 lifetime in the LAN. Select this option to manually enter an IPv6 address if you want to use a static IP address. LAN IPv6 Address Enter the LAN IPv6 address you want to assign to your ARMOR Z1 in hexadecimal notation. ARMOR Z1 User's Guide 105