ZyXEL ARMOR Z1 - Model NBG6816 User Guide - Page 88
Wireless Screen
View all ZyXEL ARMOR Z1 - Model NBG6816 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Chapter 11 Wireless LAN Number) in the devices. Then, they connect and set up a secure network by themselves. See how to set up a secure wireless network using WPS in the Section 8.2 on page 49. 11.2 Wireless Screen Use this screen to configure the SSID and wireless security of the ARMOR Z1's default wireless LAN. Note: If you are configuring the ARMOR Z1 from a computer connected to the wireless LAN and you change the ARMOR Z1's SSID, channel or security settings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the ARMOR Z1's new settings. Click Expert > Wireless. Figure 54 Expert > Wireless The following table describes the general wireless LAN labels in this screen. Table 28 Expert > Wireless LABEL Wireless Setup Band Wireless LAN DESCRIPTION Select the frequency band to set whether you want to apply the wireless and security settings to the default 2.4GHz or 5GHz wireless LAN. Select Enable to activate the 2.4GHz and/or 5GHz wireless LAN. Select Disable to turn it off. You can enable or disable both 2.4GHz and 5GHz wireless LANs by using the WIFI button located on the back panel of the ARMOR Z1. ARMOR Z1 User's Guide 88