ZyXEL ARMOR Z1 - Model NBG6816 User Guide - Page 13
Table 1, COLOR, STATUS, DESCRIPTION, Introduction, ARMOR Z1 User's Guide
View all ZyXEL ARMOR Z1 - Model NBG6816 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 1 Introduction Table 1 Front Panel LEDs (continued) LED COLOR STATUS Internet White On Off 2.4G WLAN/WPS White Off Amber 5G WLAN/WPS Off White Off Amber Off Figure 2 Rear Panel Blinking On Blinking On Blinking On Blinking On Blinking DESCRIPTION The ARMOR Z1 has an IP connection but no traffic. Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used) and the connection is up. The ARMOR Z1 is sending or receiving IP traffic. The ARMOR Z1 does not have an IP connection. The ARMOR Z1 is ready and the 2.4GHz wireless LAN is on, but is not sending/receiving data through the wireless LAN. The ARMOR Z1 is sending/receiving data through the wireless LAN. The wireless LAN is not ready or has failed. WPS is enabled. The ARMOR Z1 is in the process of firmware upgrading, configuration restoring, or resetting. The ARMOR Z1 is negotiating a WPS connection with a wireless client. WPS is disabled. The ARMOR Z1 is ready and the 5GHz wireless LAN is on, but is not sending/receiving data through the wireless LAN. The ARMOR Z1 is sending/receiving data through the wireless LAN. The wireless LAN is not ready or has failed. WPS is enabled. The ARMOR Z1 is in the process of firmware upgrading, configuration restoring, or resetting. The ARMOR Z1 is negotiating a WPS connection with a wireless client. WPS is disabled. LAN 1-4 WAN ARMOR Z1 User's Guide 13