ZyXEL GS1500-24P User Guide - Page 94
Table 28
View all ZyXEL GS1500-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 11 Mirroring Note: Before configuring a policy-based mirroring rule, you must first assign one of the mirror sets to a mirroring port on the port-based mirroring screen. See Section 11.3 on page 92 for more details. Figure 45 Configuration > Mirroring > Policy-based MIrroring > Add/Modify The following table describes the related labels in this screen. Table 28 Configuration > Mirroring > Policy-based MIrroring > Add/Modify LABEL DESCRIPTION Name Enter a descriptive name for the policy. Destination Enter a destination IP address in dotted decimal notation. IP Address Mask Enter the subnet mask of the Destination IP Address. Source IP Address Enter a source IP address in dotted decimal notation. Mask Enter the subnet mask of the Source IP Address. TCP/UDP Type the source port number to which the policy should be applied. Type 0 Destination to ignore this field. See Appendix B on page 171 for a list of common Port services. TCP/UDP Type the destination port number to which the rule should be applied. Type Source Port 0 to ignore this field. See Appendix B on page 171 for a list of common services. Mirror Set Select the mirror set index number 1 or 2. This is used in conjunction with the port-based mirroring screen. For example, if mirror set 1 is using port 5 as a mirroring port then port 5 will be the mirroring port for this policy if mirror set 1 is selected on this screen. You cannot use this field if you have not assigned a mirroring port to a mirror set index on the port-based mirroring screen. Add Click Add to save the policy to the Switch. 94 GS1500-24P User's Guide