ZyXEL P-314Plus User Guide - Page 113
Configuring a Filter Rule, TCP/IP Filter Rule, Menu 21.1 - Filter Rules Summary
View all ZyXEL P-314Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch The protocol dependent filter rules abbreviation are listed as follows: Table 7-2 Rule Abbreviations Used ABBREVIATION DESCRIPTION IP Pr Protocol SA Source Address SP Source Port number DA Destination Address DP Destination Port number GEN Off Offset Len Length Refer to the next section for information on configuring the filter rules. 7.2.2 Configuring a Filter Rule To configure a filter rule, type its number in Menu 21.1 - Filter Rules Summary and press [ENTER] to open menu 21.1.1 for the rule. To speed up filtering, all rules in a filter set must be of the same class, i.e., protocol filters or generic filters. The class of a filter set is determined by the first rule that you create. When applying the filter sets to a port, separate menu fields are provided for protocol and device filter sets. If you include a protocol filter set in a device filter field or vice versa, the Prestige will warn you and will not allow you to save. 7.2.3 TCP/IP Filter Rule This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on the fields in the IP and the upper layer protocol, e.g., UDP and TCP headers. To configure TCP/IP rules, select press [ENTER] to open Menu 21.1.1 - TCP/IP Filter Rule, as shown next. Filter Configuration 7-7