ZyXEL P-314Plus User Guide - Page 140

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch Table 9-1 SNMP Configuration Menu Fields FIELD DESCRIPTION EXAMPLE Get Community Type the Get Community, which is the password for the incoming Get- and GetNext requests from the management station. Public Set Community Type the Set community, which is the password for incoming Set requests from the management station. Public Trusted Host If you enter a trusted host, your Prestige will only respond to SNMP messages from this address. A blank (default) field means your Prestige will respond to all SNMP messages it receives, regardless of source. Blank Trap: Community Type the trap community, which is the password sent with each trap to the SNMP manager. Public Trap: Destination Type the IP address of the station to send your SNMP traps to. Blank When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or [ESC] to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen. 9.4 SNMP Traps The Prestige will send traps to the SNMP manager when any one of the following events occurs: Table 9-2 SNMP Traps TRAP # 0 1 2 3 4 6 6a TRAP NAME coldStart (defined in RFC-1215) warmStart (defined in RFC-1215) LinkUp LinkDown authenticationFailure (defined in RFC-1215) whyReboot (defined in ZYXELMIB) For intentional reboot: DESCRIPTION A trap is sent after booting (power on). A trap is sent after booting (software reboot). A trap is sent when the link is established. A trap is sent when the link is down. A trap is sent to the manager when receiving any SNMP get or set requirements with wrong community (password). A trap is sent with the reason of restart before rebooting when the system is going to restart (warmstart). A trap is sent with the message "System reboot by user!" if reboot is done intentionally, (e.g. download new files, CI command "sys reboot", etc.). 9-4 SNMP Configuration