ZyXEL P-314Plus User Guide - Page 166
TFTP and FTP over WAN Will Not Work When, Example of FTP Commands from the DOS Prompt
View all ZyXEL P-314Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch Example of FTP Commands from the DOS Prompt 331 Enter PASS command Password: 230 Logged in ftp> bin 200 Type I OK ftp> get rom-0 zyxel.rom 200 Port command okay 150 Opening data connection for STOR ras 226 File received OK ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit Figure 12-2 FTP Session Example FTP GUI Clients The following table describes some of the commands that you may see in FTP GUI clients. Table 12-2 General Commands for GUI Clients COMMAND Host Address DESCRIPTION Enter the address of the host server. Login Type Transfer Type Anonymous. This is when a user I.D. and password is automatically supplied to the server for anonymous access. Anonymous logins will work only if your ISP or service administrator has enabled this option. Normal. The server requires a unique User ID and Password to login. Transfer files in either ASCII (plain text format) or in binary mode. Initial Remote Directory Initial Local Directory Specify the default remote directory (path). Specify the default local directory (path). TFTP and FTP over WAN Will Not Work When • Telnet service is disabled in menu 24.11. • A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block Telnet service. 12-4 Firmware and Configuration Maintenance