ZyXEL P-314Plus User Guide - Page 95
Editing TCP/IP Options (with Ethernet Encapsulation)
View all ZyXEL P-314Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch Table 5-3 Fields in Menu 11.1 (PPPoE Encapsulation Specific Only) FIELD DESCRIPTION Period(hr) This field is the time period that the budget should be reset. For example, if we are allowed to call this remote node for a maximum of 10 minutes every hour, then the Allocated Budget(min) is (10 minutes) and the Period(hr) is 1 (hour). Schedules You can apply up to four schedule sets here. For more details please refer to the Call Scheduling chapter. Nailed-Up This field specifies if you want to make the connection to Connection this remote node a nailed-up connection. More details are given earlier in this section. Session Options Idle Timeout This value specifies the idle time (i.e., the length of time there is no traffic from the Prestige to the remote node) in seconds that can elapse before the Prestige automatically disconnects the PPPoE connection. This option only applies when the Prestige initiates the call. EXAMPLE 1 300 seconds (default) 5.2 Editing TCP/IP Options (with Ethernet Encapsulation) Move the cursor to the Edit IP field in Menu 11.1, then press the [SPACE BAR] to set the value to Yes. Press [ENTER] to open Menu 11.3 - Network Layer Options. Menu 11.3 - Remote Node Network Layer Options IP Address Assignment= Dynamic Rem IP Address= N/A Rem IP Subnet Mask= N/A My WAN Addr=0.0.0.0 Network Address Translation= SUA only Metric= 1 Private= No RIP Direction= None Version= N/A Multicast= None Enter here to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 5-4 Remote Node Network Layer Options Remote Node Setup 5-7