ZyXEL P-314Plus User Guide - Page 69

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch The following figure shows how you apply NAT to the remote node in menu 11.1. Step 1. Enter 11 from the main menu. Step 2. Move the cursor to the Edit IP field, press the [SPACE BAR] to select Yes and then press Step 3. [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options. Menu 11.3 - Remote Node Network Layer Options IP Address Assignment= Dynamic IP Address: N/A IP Subnet Mask= N/A Gateway IP Addr= N/A Network Address Translation= Full Feature Metric= 1 Private= No RIP Direction= None Version= N/A Multicast= None Enter here to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 4-4 Menu 11.3 - Applying NAT to the Remote Node The following table describes the options for Network Address Translation. FIELD Network Address Translation Table 4-3 Applying NAT in Menus 4 & 11.3 OPTIONS Full Feature None SUA Only DESCRIPTION When you select this option the SMT will use Address Mapping Set 1 (menu 15.1 - see section 4.3.1 for further discussion). You can configure any of the mapping types described in Table 4-2. Choose Full Feature if you have multiple public WAN IP addresses for your Prestige. NAT is disabled when you select this option. When you select this option the SMT will use Address Mapping Set 255 (menu 15.1 - see section 4.3.1). Choose SUA Only if you have just one public WAN IP address for your Prestige. NAT 4-7