ZyXEL P-314Plus User Guide - Page 97
Editing TCP/IP Options (with PPTP Encapsulation)
View all ZyXEL P-314Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch Table 5-4 Remote Node Network Layer Options Menu Fields FIELD DESCRIPTION EXAMPLE Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a Multicast group. The Prestige supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2). Press [SPACE BAR] to enable IP Multicasting or select None to disable it. See the previous Part for more information on this feature. IGMP-v2 Once you have completed filling in the Network Layer Options Menu, press [ENTER] to return to menu 11. Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC] at any time to cancel. 5.2.1 Editing TCP/IP Options (with PPTP Encapsulation) Make sure that Encapsulation is set to PPTP in menu 11.1. Then move the cursor to the Edit IP field in menu 11.1, press the [SPACE BAR] to toggle No to Yes. Press [ENTER] to open Menu 11.3 - Network Layer Options. Menu 11.3 - Remote Node Network Layer Options IP Address Assignment= Dynamic Rem IP Address= N/A Rem Subnet Mask= N/A My WAN Addr= N/A Network Address Translation= SUA Only Metric= 1 Private= No RIP Direction= None Version= N/A Multicast= None Enter here to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 5-5 Remote Node Network Layer Options The next table gives you instructions about configuring remote node network layer options. Remote Node Setup 5-9