ZyXEL P-314Plus User Guide - Page 74
Menu 15.1.1.1 - Editing/Configuring an Individual Rule in a Set, Action, Menu 15.1.1.1
View all ZyXEL P-314Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch FIELD Action Select Rule DESCRIPTION The default is Edit. Edit means you want to edit a selected rule (see following field). Insert Before means to insert a rule before the rule selected. The rules after the selected rule will then be moved down by one rule. Delete means to delete the selected rule and then all the rules after the selected one will be advanced one rule. None disables the Select Rule item. When you choose Edit, Insert Before or Delete in the previous field the cursor jumps to this field to allow you to select the rule to apply the action in question. EXAMPLE Edit 1 You must press [ENTER] at the bottom of the screen to save the whole set. You must do this again if you make any changes to the set - including deleting a rule. No changes to the set take place until this action is taken. Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global Start/End IPs. An End IP address must be numerically greater than its corresponding IP Start address. Menu 15.1.1.1 Address Mapping Rule Type= One-to-One Local IP: Start= End = N/A Global IP: Start= End = N/A Press ENTER to Confirm or ESC to Cancel: Press Space Bar to Toggle. Figure 4-9 Menu 15.1.1.1 - Editing/Configuring an Individual Rule in a Set 4-12 NAT