ZyXEL P-314Plus User Guide - Page 125
Remote Node Filters, Filtering LAN Traffic
View all ZyXEL P-314Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch Menu 3.1 - LAN Port Filter Setup Input Filter Sets: protocol filters= 2 device filters= Output Filter Sets: Protocol filters= device filters= Press ENTER to Confirm or ESC to Cancel: Apply factory default filter here. Figure 7-16 Filtering LAN Traffic 7.5.2 Remote Node Filters Go to menu 11.5 (shown next - note that call filter sets are only present for PPPoE encapsulation) and enter the number(s) of the filter set(s) as appropriate. You can cascade up to four filter sets by entering their numbers separated by commas. The factory default filter set, NetBIOS_WAN, can be applied in menu 11.5 to block local NetBIOS traffic from triggering calls to the ISP (when you are using PPPoE or PPTP encapsulation only). Enter 1 in protocol filters under Output Filter Sets when using Ethernet encapsulation, and in the protocol filters field under Call Filter Sets when using PPPoE or PPTP encapsulation. Apply them as shown in the following figure. Menu 11.5 - Remote Node Filter Input Filter Sets: protocol filters= 3 device filters= Output Filter Sets: protocol filters= 1 device filters= Call Filter Sets: protocol filters= 1 device filters= Apply factory default Filters here. Enter here to CONFIRM or ESC to CANCEL: Figure 7-17 Filtering Remote Node Traffic Filter Configuration 7-19