ZyXEL P-314Plus User Guide - Page 53

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch Menu 3.2.1 - IP Alias Setup IP Alias 1= No IP Address= N/A IP Subnet Mask= N/A RIP Direction= N/A Version= N/A Incoming protocol filters= N/A Outgoing protocol filters= N/A IP Alias 2= No IP Address= N/A IP Subnet Mask= N/A RIP Direction= N/A Version= N/A Incoming protocol filters= N/A Outgoing protocol filters= N/A Enter here to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 3-5 Menu 3.2.1 - IP Alias Setup Follow the instructions in the table shown next to configure IP Alias parameters. Table 3-5 IP Alias Setup Menu Fields FIELD DESCRIPTION IP Alias Choose Yes to configure the LAN network for the Prestige. IP Address Enter the IP address of your Prestige in dotted decimal notation IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the Prestige. RIP Direction Press the [SPACE BAR] to select the RIP direction. Options are None, Both, In Only or Out Only. Version Press the [SPACE BAR] to select the RIP version. Options are RIP-1, RIP-2B or RIP-2M. Incoming Enter the filter set(s) you wish to apply to the incoming traffic Protocol Filters between this node and the Prestige. EXAMPLE Yes 192.168.2.1 255.255.255.0 None RIP-1 Internet Access 3-9