ZyXEL P-662HW-61 User Guide - Page 107
Configuring Advanced LAN Setup
View all ZyXEL P-662HW-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Chapter 6 LAN Setup The following table describes the fields in this screen. Table 29 LAN IP LABEL DESCRIPTION TCP/IP IP Address Enter the IP address of your ZyXEL Device in dotted decimal notation, for example, 192.168.1.1 (factory default). IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given). Apply Click Apply to save your changes back to the ZyXEL Device. Cancel Click Cancel to begin configuring this screen afresh. Advanced Setup Click this button to display the Advanced LAN Setup screen and edit more details of your LAN setup. 6.3.1 Configuring Advanced LAN Setup Use this screen to edit your ZyXEL Device's advanced LAN settings. Click the Advanced Setup button in the LAN IP screen. The screen appears as shown. Figure 56 Advanced LAN Setup The following table describes the labels in this screen. Table 30 Advanced LAN Setup LABEL DESCRIPTION RIP & Multicast Setup RIP Direction Select the RIP direction from None, Both, In Only and Out Only. RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M. Multicast IGMP (Internet Group Management Protocol) is a network-layer protocol used to establish membership in a multicast group. The ZyXEL Device supports both IGMP version 1 (IGMP-v1) and IGMP-v2. Select None to disable it. P-662H/HW-D Series User's Guide 107