ZyXEL P-662HW-61 User Guide - Page 69

Chapter 3 Wizard Setup for Internet Access 3.3.1 Automatically assign a WPA key Choose Manually assign a WPA key in the Wireless LAN setup screen to allow the ZyXEL Device to configure a PSK key for you based on the setup key you entered on the previous Wireless LAN setup screen. This key acts like a password to ensure only those Wireless LAN devices you authorize are configured by OTIST. 3.3.2 Manually assign a WPA-PSK key Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a PreShared Key. Figure 33 Manually assign a WPA key The following table describes the labels in this screen. Table 16 Manually assign a WPA key LABEL DESCRIPTION Pre-Shared Key Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless connection by configuring WPA in the wireless LAN screens. You need to configure an authentication server to do this. Back Click Back to display the previous screen. Next Click Next to proceed to the next screen. Exit Click Exit to close the wizard screen without saving. 3.3.3 Manually assign a WEP key Choose Manually assign a WEP key to setup WEP Encryption parameters. P-662H/HW-D Series User's Guide 69