ZyXEL P-662HW-61 User Guide - Page 124
Wireless LAN Advanced Setup
View all ZyXEL P-662HW-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Chapter 7 Wireless LAN Table 40 Wireless: WPA(2) LABEL DESCRIPTION Cancel Click Cancel to reload the previous configuration for this screen. Advanced Setup Click Advanced Setup to display the Wireless Advanced Setup screen and edit more details of your WLAN setup. 7.5.5 Wireless LAN Advanced Setup Use this screen to configure advanced wireless settings. Click the Advanced Setup button in the General screen. The screen appears as shown. Figure 67 Advanced The following table describes the labels in this screen. Table 41 Wireless LAN: Advanced LABEL DESCRIPTION Wireless Advanced Setup RTS/CTS Threshold Enter a value between 0 and 2432. If you select the Enable 802.11g+ mode checkbox, this field is grayed out and the ZyXEL Device uses 4096 automatically. Fragmentation It is the maximum data fragment size that can be sent. Enter a value between 256 Threshold and 2432. If you select the Enable 802.11g+ mode checkbox, this field is grayed out and the ZyXEL Device uses 4096 automatically. Output Power Set the output power of the ZyXEL Device in this field. This control changes the strength of the ZyXEL Device's antenna gain or transmission power. Antenna gain is the increase in coverage. Higher antenna gain improves the range of the signal for better communications. If there is a high density of APs within an area, decrease the output power of the ZyXEL Device to reduce interference with other APs. The options are Maximum, Middle and Minimum. Preamble Select a preamble type from the drop-down list menu. Choices are Long, Short or Dynamic. The default setting is Long. See the section on preamble for more information. 124 P-662H/HW-D Series User's Guide