ZyXEL P-662HW-61 User Guide - Page 223
VPN Setup Screen
View all ZyXEL P-662HW-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Chapter 16 VPN Screens If the remote secure gateway has a static WAN IP address, enter it in the Secure Gateway Address field. You may alternatively enter the remote secure gateway's domain name (if it has one) in the Secure Gateway Address field. You can also enter a remote secure gateway's domain name in the Secure Gateway Address field if the remote secure gateway has a dynamic WAN IP address and is using DDNS. The ZyXEL Device has to rebuild the VPN tunnel each time the remote secure gateway's WAN IP address changes (there may be a delay until the DDNS servers are updated with the remote gateway's new WAN IP address). 16.4.1 Dynamic Secure Gateway Address If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter 0.0.0.0 as the secure gateway's address. In this case only the remote secure gateway can initiate SAs. This may be useful for telecommuters initiating a VPN tunnel to the company network (see Section 16.18 on page 243 for configuration examples). The Secure Gateway IP Address may be configured as 0.0.0.0 only when using IKE key management and not Manual key management. 16.5 VPN Setup Screen The following figure helps explain the main fields in the web configurator. Figure 128 IPSec Summary Fields Local and remote IP addresses must be static. Click Security > VPN to open the Setup screen. This screen consists of a read-only menu of your IPSec rules (tunnels). Edit a VPN by selecting an index number and then configuring its associated submenus. P-662H/HW-D Series User's Guide 223