ZyXEL P-662HW-61 User Guide - Page 242
Configuring Global Setting
View all ZyXEL P-662HW-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Chapter 16 VPN Screens When there is outbound traffic but no inbound traffic, the SA times out automatically after two minutes. A tunnel with no outbound or inbound traffic is "idle" and does not timeout until the SA lifetime period expires. See Section 16.6 on page 225on keep alive to have the ZyXEL Device renegotiate an IPSec SA when the SA lifetime expires, even if there is no traffic. Figure 136 VPN: SA Monitor The following table describes the fields in this screen. Table 96 VPN: SA Monitor LABEL DESCRIPTION No. This is the security association index number. Name This field displays the identification name for this VPN policy. Encapsulation This field displays Tunnel or Transport mode. IPSec Algorithm This field displays the security protocol, encryption algorithm, and authentication algorithm used in each VPN tunnel. Disconnect Select one of the security associations, and then click Disconnect to stop that security association. Refresh Click Refresh to display the current active VPN connection(s). 16.17 Configuring Global Setting Use this screen to change your ZyXEL Device's global VPN settings. Click VPN and then Global Setting. The screen appears as shown. Figure 137 VPN: Global Setting 242 P-662H/HW-D Series User's Guide