ZyXEL P-662HW-61 User Guide - Page 135
Multiple SSID Example
View all ZyXEL P-662HW-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Chapter 7 Wireless LAN Table 47 Multiple SSID Commands COMMAND DESCRIPTION setprivacy type This command specifies the security mode for the guest wireless network. Type one of the following: 0 to disable security on the guest wireless network, 1 to enable 64-bit WEP key encryption, 2 to enable 128-bit WEP key encryption, 3 256-bit WEP key encryption. setprivacy wepkey This command allows you to create up to four WEP keys. Enter 1, 2, 3 or 4 to specify which WEP key you are creating followed by any 5, 13 or 29 characters (ASCII string) or 10, 26 or 58 hexadecimal characters ("0-9", "AF") for a 64-bit, 128-bit or 256-bit WEP key respectively. setprivacy defaultkey This command specifies which WEP key guests have to configure on their wireless clients to access the guest wireless network. guest_autoOff < This command enables or disables an automatic timeout feature of the guest wireless network. If you enable this feature the guest wireless network becomes disabled after the specified amount of time. You need to enter two parameters. Type 0 to disable the automatic timeout feature or type 1 to enable it, for the next value enter the number of minutes that the guest wireless network stays active. Enter a number from 0 to 30000. Entering 0 resets the value to the default (60 minutes). show Note: This command is hidden. It doesn't show up when you type the wlan mssid command. This command allows you to review your guest wireless network settings. 7.10.2 Multiple SSID Example This example shows how to configure a guest wireless network with the following parameters. Table 48 Multiple SSID Example Configuration PARAMETER VALUE SSID guestnetwork Security 64-bit WEP key encryption. WEP key abcde Other Intranet blocking is enabled, so that guests only have access to the Internet and cannot access the local network. P-662H/HW-D Series User's Guide 135