ZyXEL P-662HW-61 User Guide - Page 42
Getting To Know Your ZyXEL Device, P-662H/HW-D Series User's Guide, Front Panel LEDs
View all ZyXEL P-662HW-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 1 Getting To Know Your ZyXEL Device Table 1 Front Panel LEDs (continued) LED COLOR STATUS DESCRIPTION WLAN (P- Green On 662HW only) The ZyXEL Device is ready, but is not sending/receiving data through the wireless LAN. Blinking The ZyXEL Device is sending/receiving data through the wireless LAN. None Off The wireless LAN is not ready or has failed. DSL/ACT Green On The ZyXEL Device has a successful DSL connection. Blinking The DSL is attempting to synchronize with the ZyXEL Device. Off The system is not receiving power or there is no DSL connection. INTERNET Green On The ZyXEL Device is connected with no traffic detected. Blinking The ZyXEL Device is sending/receiving data. Red On The ZyXEL Device failed to authenticate. Off The DSL line is down. CON/AUX Green On The CON/AUX switch is set to CON, the CON/AUX port is connected to a management computer and someone is logged into the ZyXEL Device. Amber On The CON/AUX switch is set to AUX and the CON/AUX port has an Internet connection through a dial-up modem. Blinking The CON/AUX switch is set to AUX and the CON/AUX port is sending or receiving data through a dial-up modem or ISDN TA. Off The CON/AUX link is not ready, or has failed. Refer to the Quick Start Guide for information on hardware connections. 42 P-662H/HW-D Series User's Guide