ZyXEL P-662HW-61 User Guide - Page 283

Chapter 19 Bandwidth Management Table 120 Bandwidth Management: Rule Setup (continued) LABEL DESCRIPTION Priority Select a priority from the drop down list box. Choose High, Mid or Low. Bandwidtht (kbps) Specify the maximum bandwidth allowed for the rule in kbps. The recommendation is a setting between 20 kbps and 20000 kbps for an individual rule. Add Click this button to add a rule to the following table. # This is the number of an individual bandwidth management rule. Active This displays whether the rule is enabled. Select this check box to have the ZyXEL Device apply this bandwidth management rule. Enable a bandwidth management rule to give traffic that matches the rule priority over traffic that does not match the rule. Enabling a bandwidth management rule also allows you to control the maximum amounts of bandwidth that can be used by traffic that matches the rule. Rule Name This is the name of the rule. Destination Port This is the port number of the destination. 0 means any destination port. Priority This is the priority of this rule. Bandwidtht (kbps) This is the maximum bandwidth allowed for the rule in kbps. Modify Click the Edit icon to go to the screen where you can edit the rule. Click the Delete icon to remove an existing rule. Apply Click Apply to save your changes back to the ZyXEL Device. Cancel Click Cancel to begin configuring this screen afresh. 19.8.1 Rule Configuration Click the Edit icon or select User Defined from the Service drop-down list in the Rule Setup screen to configure a bandwidth management rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity (bandwidth budgets) to specific applications and/or subnets. P-662H/HW-D Series User's Guide 283