ZyXEL WAP3205 v2 User Guide - Page 125
Product Specifications
View all ZyXEL WAP3205 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
CHAPTER 14 Product Specifications The following tables summarize the WAP3205's hardware and firmware features. Table 50 Hardware Features Dimensions (W x D x 162 mm x 115 mm x 33 mm H) Weight 245 g Power Specification Input: 100~240 V AC, 50~60 Hz Two Ethernet ports Output: 12 V DC 1A Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or fullduplex mode. LEDs Reset Button WPS button Antenna Operation Environment Storage Environment Auto-crossover: Use either crossover or straight-through Ethernet cables. PWR, LAN1-2 WLAN, WPS The reset button is built into the rear panel. Use this button to restore the WAP3205 to its factory default settings. Press for 1 second to restart the device. Press for 5 seconds to restore to factory default settings. Press the WPS on two WPS enabled devices within 120 seconds for a security-enabled wireless connection. The WAP3205 is equipped with two 2dBi (2.4GHz) detachable antennas to provide clear radio transmission and reception on the wireless network. Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF Humidity: 20% ~ 90% Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF Humidity: 20% ~ 95% Table 51 Firmware Features FEATURE DESCRIPTION Default IP Address 192.168.1.2 Default Subnet Mask 255.255.255.0 (24 bits) Default Password 1234 Wireless Interface Wireless LAN Default Wireless SSID ZyXEL WAP3205 User's Guide 125