ZyXEL WAP3205 v2 User Guide - Page 45
Access Point Mode, 6.1 Overview, 6.2 What You Can Do, 6.3 What You Need to Know - ip
View all ZyXEL WAP3205 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CHAPTER 6 Access Point Mode 6.1 Overview The WAP3205 is set to access point mode by default. In this mode your WAP3205 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example. Figure 20 Wireless Internet Access in Access Point Mode Note: See Chapter 9 on page 73 for an example of setting up a wireless network in Access Point mode. 6.2 What You Can Do • Use the Status screen (Section 6.4 on page 47) to view read-only information about your WAP3205. • Use the LAN screen (Chapter 11 on page 101) to set the IP address for your WAP3205 acting as an access point. • Use the Wireless LAN screens (Chapter 10 on page 83) to configure the wireless settings and wireless security between the wireless clients and the WAP3205. 6.3 What You Need to Know See Chapter 9 on page 73 for a tutorial on setting up a network with the WAP3205 as an access point. WAP3205 User's Guide 45