Home » ZyXEL Manuals » Wireless » ZyXEL WAP3205 v2 » Manual Viewer

ZyXEL WAP3205 v2 User Guide - Page 56

Table 18

Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Chapter 7 Client Mode Table 18 Status Screen: Client Mode LABEL DESCRIPTION Status This shows the current status of the Wireless LAN - ON. Name (SSID) This shows a descriptive name used to identify the WAP3205 in the wireless LAN. Connect Status This shows whether or not the WAP3205 has successfully associated with an access point - Connected or Disassociated. 802.11 Mode This shows the wireless standard. WPS This displays Configured when the WPS has been set up. This displays Unconfigured if the WPS has not been set up. Interface Status Interface Status Click the status to display Network > Wireless LAN > WPS screen. This displays the WAP3205 port types. The port types are: LAN and WLAN. For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or connected). Rate For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. For the LAN ports, this displays the port speed or N/A when the line is disconnected. System Status Item Data System Up Time Current Date/Time System Resource CPU Usage Memory Usage System Setting Configuration Mode Summary Packet Statistics For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/A when the WLAN is disabled. This column shows the type of data the WAP3205 is recording. This column shows the actual data recorded by the WAP3205. This is the total time the WAP3205 has been on. This field displays your WAP3205's present date and time. This displays what percentage of the WAP3205's processing ability is currently used. When this percentage is close to 100%, the WAP3205 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management. This shows what percentage of the heap memory the WAP3205 is using. This shows the web configurator mode you are viewing - Expert. Click Details... to go to the Monitor > Packet Statistics screen (Section 3.4 on page 30). Use this screen to view port status and packet specific statistics. 56 WAP3205 User's Guide

Section	Page
WAP3205	1
About This User's Guide	3
Document Conventions	5
Safety Warnings	7
Contents Overview	9
Table of Contents	11
Introduction	17
Getting to Know Your WAP3205	19
1.1 Overview	19
1.2 Applications	19
1.3 Ways to Manage the WAP3205	19
1.4 Good Habits for Managing the WAP3205	20
1.5 LEDs	20
Introducing the Web Configurator	23
2.1 Overview	23
2.2 Accessing the Web Configurator	23
2.2.1 Login Screen	24
2.2.2 Password Screen	25
2.2.3 Home Screen	25
2.3 Resetting the WAP3205	27
2.3.1 Procedure to Use the Reset Button	28
Monitor	29
3.1 Overview	29
3.2 What You Can Do	29
3.3 Log	29
3.4 Packet Statistics	30
3.5 WLAN Station Status	32
WAP3205 Modes	33
4.1 Overview	33
4.1.1 Web Configurator Modes	33
4.1.2 Device Modes	33
Easy Mode	35
5.1 Overview	35
5.2 What You Can Do	36
5.3 What You Need to Know	36
5.4 Navigation Panel	37
5.5 Network Map	37
5.6 Control Panel	38
5.6.1 Wireless Security	39
5.6.2 WPS	41
5.7 Status Screen in Easy Mode	42
Access Point Mode	45
6.1 Overview	45
6.2 What You Can Do	45
6.3 What You Need to Know	45
6.3.1 Setting your WAP3205 to AP Mode	46
6.3.2 Accessing the Web Configurator in Access Point Mode	46
6.3.3 Configuring your WLAN, LAN and Maintenance Settings	47
6.4 AP Mode Status Screen	47
Client Mode	53
7.1 Overview	53
7.2 What You Can Do	53
7.3 What You Need to Know	54
7.3.1 Setting your WAP3205 to Client Mode	54
7.3.2 Accessing the Web Configurator in Client Mode	54
7.4 Client Mode Status Screen	55
7.5 Wireless LAN Profile Screen	57
7.5.1 Adding a New WLAN Profile	58
7.5.2 Site Survey Screen	62
7.5.3 WPS Screen	63
Universal Repeater Mode	65
8.1 Overview	65
8.2 What You Can Do	65
8.3 What You Need to Know	66
8.3.1 Setting your WAP3205 to Universal Repeater Mode	66
8.3.2 Accessing the Web Configurator in Universal Repeater Mode	66
8.4 Universal Repeater Mode Status Screen	67
8.5 Universal Repeater Screen	69
8.5.1 No Security	70
8.5.2 Static WEP	70
8.5.3 WPA(2)-PSK	72
Tutorials	73
9.1 Overview	73
9.2 Connecting to the Internet from an Access Point	73
9.3 Configuring Wireless Security Using WPS	73
9.3.1 Push Button Configuration (PBC)	74
9.3.2 PIN Configuration	75
9.4 Enabling and Configuring Wireless Security (No WPS)	77
9.4.1 Configure Your Notebook	79
Configuration	81
Wireless LAN	83
10.1 Overview	83
10.2 What You Can Do	84
10.3 What You Should Know	84
10.3.1 Wireless Security Overview	84
10.4 General Wireless LAN Screen	87
10.5 Wireless Security Screen	88
10.5.1 No Security	88
10.5.2 WEP Encryption	89
10.5.3 WPA-PSK/WPA2-PSK	91
10.6 MAC Filter	92
10.7 Wireless LAN Advanced Screen	93
10.8 Quality of Service (QoS) Screen	95
10.9 WPS Screen	95
10.10 WPS Station Screen	97
10.11 Scheduling Screen	97
10.12 WDS Screen	99
LAN	101
11.1 Overview	101
11.2 What You Can Do	101
11.3 What You Need To Know	102
11.3.1 LAN TCP/IP	102
11.3.2 IP Alias	102
11.4 LAN IP Screen	103
11.5 IP Alias Screen	104
Maintenance and Troubleshooting	105
Maintenance	107
12.1 Overview	107
12.2 What You Can Do	107
12.3 General Screen	108
12.4 Password Screen	108
12.5 Time Setting Screen	109
12.6 Firmware Upgrade Screen	111
12.7 Configuration Backup/Restore Screen	113
12.8 Reset/Restart Screen	114
12.9 System Operation Mode Overview	115
12.10 Sys Op Mode Screen	116
Troubleshooting	119
13.1 Power, Hardware Connections, and LEDs	119
13.2 WAP3205 Access and Login	120
13.3 Internet Access	122
13.4 Resetting the WAP3205 to Its Factory Defaults	123
13.5 Wireless Router/AP Troubleshooting	124
Product Specifications	125
14.1 Wall-mounting Instructions	126
Appendices and Index	129
Pop-up Windows, JavaScripts and Java Permissions	131
IP Addresses and Subnetting	139
Setting up Your Computer’s IP Address	149
Wireless LANs	167
Common Services	179
Legal Information	183

Match case Limit results 1 per page

Chapter 7 Client Mode

WAP3205 User’s Guide

Status

This shows the current status of the Wireless LAN -

Name (SSID)

This shows a descriptive name used to identify the WAP3205 in the

wireless LAN.

Connect Status

This shows whether or not the WAP3205 has successfully associated with

an access point -

Connected

Disassociated

802.11 Mode

This shows the wireless standard.

WPS

This displays

Configured

when the WPS has been set up.

This displays

Unconfigured

if the WPS has not been set up.

Click the status to display

Network > Wireless LAN > WPS

screen.

Interface Status

Interface

This displays the WAP3205 port types. The port types are:

LAN

and

WLAN

Status

For the LAN and WAN ports, this field displays

Down

(line is down) or

(line is up or connected).

For the WLAN, it displays

when the WLAN is enabled or

Down

when

the WLAN is disabled.

Rate

For the LAN ports, this displays the port speed or

N/A

when the line is

disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN

is enabled and

N/A

when the WLAN is disabled.

System Status

Item

This column shows the type of data the WAP3205 is recording.

Data

This column shows the actual data recorded by the WAP3205.

System Up Time

This is the total time the WAP3205 has been on.

Current Date/Time

This field displays your WAP3205’s present date and time.

System Resource

CPU Usage

This displays what percentage of the WAP3205’s processing ability is

currently used. When this percentage is close to 100%, the WAP3205 is

running at full load, and the throughput is not going to improve anymore.

If you want some applications to have more throughput, you should turn

off other applications (for example, using bandwidth management.

Memory Usage

This shows what percentage of the heap memory the WAP3205 is using.

System Setting

Configuration Mode

This shows the web configurator mode you are viewing -

Expert

Summary

Packet Statistics

Click

Details...

to go to the

Monitor >

Packet Statistics

screen

(

Section 3.4 on page 30

). Use this screen to view port status and packet

specific statistics.

Table 18

Status Screen: Client Mode

LABEL

DESCRIPTION