Home » ZyXEL Manuals » Wireless » ZyXEL WAP3205 v2 » Manual Viewer

ZyXEL WAP3205 v2 User Guide - Page 60

Table 22, Client Mode: WLAN > Profile: WEP

Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Chapter 7 Client Mode The following table describes the labels in this screen.. Table 22 Client Mode: WLAN > Profile: WEP LABEL DESCRIPTION Wireless Setup Profile Name Enter a descriptive name for this profile. Network Enter the name of the access point to which you are connecting. Name (SSID) Security Security Mode Select Static WEP to enable data encryption. PassPhrase Enter a Passphrase (up to 26 printable characters) and click Generate. A passphrase functions like a password. In WEP security mode, it is further converted by the WAP3205 into a complicated string that is referred to as the "key". This key is requested from all devices wishing to connect to a wireless network. WEP Encryption Select 64-bit WEP or 128-bit WEP. This dictates the length of the security key that the network is going to use. Authenticatio n Method Select Open or Shared Key from the drop-down list box. This field specifies whether the wireless clients have to provide the WEP key to log into the wireless network. Keep this setting at Open unless you want to force a key verification before communication between the wireless client and the ZyXEL Device occurs. ASCII Hex Select Shared Key to force the clients to provide the WEP key prior to communication. Select this option in order to enter ASCII characters as WEP key. Select this option in order to enter hexadecimal characters as a WEP key. Key 1 to Key 4 The preceding "0x", that identifies a hexadecimal key, is entered automatically. The WEP keys are used to encrypt data. Both the WAP3205 and the wireless stations must use the same WEP key for data transmission. If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-F"). If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-F"). Apply Cancel You must configure at least one key, only one key can be activated at any one time. The default key is key 1. Click Apply to save your changes back to the WAP3205. Click Canel to go back to the previous screen. 60 WAP3205 User's Guide

Section	Page
WAP3205	1
About This User's Guide	3
Document Conventions	5
Safety Warnings	7
Contents Overview	9
Table of Contents	11
Introduction	17
Getting to Know Your WAP3205	19
1.1 Overview	19
1.2 Applications	19
1.3 Ways to Manage the WAP3205	19
1.4 Good Habits for Managing the WAP3205	20
1.5 LEDs	20
Introducing the Web Configurator	23
2.1 Overview	23
2.2 Accessing the Web Configurator	23
2.2.1 Login Screen	24
2.2.2 Password Screen	25
2.2.3 Home Screen	25
2.3 Resetting the WAP3205	27
2.3.1 Procedure to Use the Reset Button	28
Monitor	29
3.1 Overview	29
3.2 What You Can Do	29
3.3 Log	29
3.4 Packet Statistics	30
3.5 WLAN Station Status	32
WAP3205 Modes	33
4.1 Overview	33
4.1.1 Web Configurator Modes	33
4.1.2 Device Modes	33
Easy Mode	35
5.1 Overview	35
5.2 What You Can Do	36
5.3 What You Need to Know	36
5.4 Navigation Panel	37
5.5 Network Map	37
5.6 Control Panel	38
5.6.1 Wireless Security	39
5.6.2 WPS	41
5.7 Status Screen in Easy Mode	42
Access Point Mode	45
6.1 Overview	45
6.2 What You Can Do	45
6.3 What You Need to Know	45
6.3.1 Setting your WAP3205 to AP Mode	46
6.3.2 Accessing the Web Configurator in Access Point Mode	46
6.3.3 Configuring your WLAN, LAN and Maintenance Settings	47
6.4 AP Mode Status Screen	47
Client Mode	53
7.1 Overview	53
7.2 What You Can Do	53
7.3 What You Need to Know	54
7.3.1 Setting your WAP3205 to Client Mode	54
7.3.2 Accessing the Web Configurator in Client Mode	54
7.4 Client Mode Status Screen	55
7.5 Wireless LAN Profile Screen	57
7.5.1 Adding a New WLAN Profile	58
7.5.2 Site Survey Screen	62
7.5.3 WPS Screen	63
Universal Repeater Mode	65
8.1 Overview	65
8.2 What You Can Do	65
8.3 What You Need to Know	66
8.3.1 Setting your WAP3205 to Universal Repeater Mode	66
8.3.2 Accessing the Web Configurator in Universal Repeater Mode	66
8.4 Universal Repeater Mode Status Screen	67
8.5 Universal Repeater Screen	69
8.5.1 No Security	70
8.5.2 Static WEP	70
8.5.3 WPA(2)-PSK	72
Tutorials	73
9.1 Overview	73
9.2 Connecting to the Internet from an Access Point	73
9.3 Configuring Wireless Security Using WPS	73
9.3.1 Push Button Configuration (PBC)	74
9.3.2 PIN Configuration	75
9.4 Enabling and Configuring Wireless Security (No WPS)	77
9.4.1 Configure Your Notebook	79
Configuration	81
Wireless LAN	83
10.1 Overview	83
10.2 What You Can Do	84
10.3 What You Should Know	84
10.3.1 Wireless Security Overview	84
10.4 General Wireless LAN Screen	87
10.5 Wireless Security Screen	88
10.5.1 No Security	88
10.5.2 WEP Encryption	89
10.5.3 WPA-PSK/WPA2-PSK	91
10.6 MAC Filter	92
10.7 Wireless LAN Advanced Screen	93
10.8 Quality of Service (QoS) Screen	95
10.9 WPS Screen	95
10.10 WPS Station Screen	97
10.11 Scheduling Screen	97
10.12 WDS Screen	99
LAN	101
11.1 Overview	101
11.2 What You Can Do	101
11.3 What You Need To Know	102
11.3.1 LAN TCP/IP	102
11.3.2 IP Alias	102
11.4 LAN IP Screen	103
11.5 IP Alias Screen	104
Maintenance and Troubleshooting	105
Maintenance	107
12.1 Overview	107
12.2 What You Can Do	107
12.3 General Screen	108
12.4 Password Screen	108
12.5 Time Setting Screen	109
12.6 Firmware Upgrade Screen	111
12.7 Configuration Backup/Restore Screen	113
12.8 Reset/Restart Screen	114
12.9 System Operation Mode Overview	115
12.10 Sys Op Mode Screen	116
Troubleshooting	119
13.1 Power, Hardware Connections, and LEDs	119
13.2 WAP3205 Access and Login	120
13.3 Internet Access	122
13.4 Resetting the WAP3205 to Its Factory Defaults	123
13.5 Wireless Router/AP Troubleshooting	124
Product Specifications	125
14.1 Wall-mounting Instructions	126
Appendices and Index	129
Pop-up Windows, JavaScripts and Java Permissions	131
IP Addresses and Subnetting	139
Setting up Your Computer’s IP Address	149
Wireless LANs	167
Common Services	179
Legal Information	183

Match case Limit results 1 per page

Chapter 7 Client Mode

WAP3205 User’s Guide

The following table describes the labels in this screen..

Table 22

Client Mode: WLAN > Profile: WEP

LABEL

DESCRIPTION

Wireless Setup

Profile Name

Enter a descriptive name for this profile.

Network

Name (SSID)

Enter the name of the access point to which you are connecting.

Security

Mode

Select

Static WEP

to enable data encryption.

PassPhrase

Enter a Passphrase (up to 26 printable characters) and click

Generate

A passphrase functions like a password. In WEP security mode, it is

further converted by the WAP3205 into a complicated string that is

referred to as the “key”. This key is requested from all devices

wishing to connect to a wireless network.

WEP

Encryption

Select

64-bit WEP

128-bit WEP

This dictates the length of the security key that the network is going to

use.

Authenticatio

n Method

Select

Open

Shared Key

from the drop-down list box.

This field specifies whether the wireless clients have to provide the WEP

key to log into the wireless network. Keep this setting at

Open

unless you

want to force a key verification before communication between the

wireless client and the ZyXEL Device occurs.

Select

Shared Key

to force the clients to provide the WEP key prior to

communication.

ASCII

Select this option in order to enter ASCII characters as WEP key.

Hex

Select this option in order to enter hexadecimal characters as a WEP key.

The preceding "0x", that identifies a hexadecimal key, is entered

automatically.

Key 1 to Key

The WEP keys are used to encrypt data. Both the WAP3205 and the

wireless stations must use the same WEP key for data transmission.

If you chose

64-bit WEP

, then enter any 5 ASCII characters or 10

hexadecimal characters ("0-9", "A-F").

If you chose

128-bit WEP

, then enter 13 ASCII characters or 26

hexadecimal characters ("0-9", "A-F").

You must configure at least one key, only one key can be activated at any

one time. The default key is key 1.

Apply

Click

Apply

to save your changes back to the WAP3205.

Cancel

Click

Canel

to go back to the previous screen.