Garmin eTrex Summit Owner's Manual (Software Version 3.00 and above) &nbs - Page 67
To select a pressure for display, To select a language - update
View all Garmin eTrex Summit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Pressure You can set the eTrex Summit to display either normalized pressure or the local ambient pressure in the Elevation Page cycle field. The normalized pressure is referenced against the last calibrated altititude or pressure. To select a pressure for display: 1. From the MENU Page, highlight 'SETUP', then press ENTER. The SETUP Page appears. 2. Press the UP or DOWN button to highlight 'SYSTEM'. Press ENTER. The SYSTEM Page appears. 3. Press the UP or DOWN button to highlight the 'PRESSURE' field. Press ENTER. 4. Press the UP or DOWN button to highlight the desired pressure. Press ENTER. Language The eTrex Summit can display in 12 languages. To select a language: 1. From the MENU Page, highlight 'SETUP', then press ENTER. The SETUP Page appears. 2. Press the UP or DOWN button to highlight 'SYSTEM'. Press ENTER. The SYSTEM Page appears. 3. Press the UP or DOWN button to highlight the 'LANGUAGE' field. Press ENTER. 4. Press the UP or DOWN button to highlight the desired selection. Press ENTER. Software Version The Software Page shows the eTrex Summit's current software version. To update the eTrex Summit's software, visit the Garmin Web site (www.garmin.com). Defaults The 'DEFAULTS' option resets all of the 'SYSTEM' setting to the factory defaults. Setup Page System Page The eTrex Summit can display in 12 different languages. The System Page shows you the software version, allowing you to update from Garmin's Web site. 53