Gateway MX6708 8511838 - Gateway Notebook Reference Guide - Page 59

Recalibrating the battery(ies

Page 59 highlights

Recalibrating the battery(ies) Recalibrating the battery(ies) Important Do not interrupt the battery recalibration process. If recalibration is interrupted, you must start the process over again. Important If, after completing this procedure, the battery charge indicator still does not show an accurate charge, contact Gateway Customer Care at the location shown on the Customer Care label. For more information, see "Gateway contact information" on page 3 If your notebook unexpectedly goes into Standby mode while you are using it but the battery charge is not low, you may need to recalibrate your battery(ies). You should also recalibrate the battery(ies) periodically to maintain the accuracy of the battery gauge(s). To recalibrate the battery(ies): 1 Connect the AC adapter, then turn on your notebook. 2 As soon as it starts and you see a startup screen, press F2. The BIOS Setup utility opens. 3 Open the Advanced menu. 4 Highlight Battery Auto Learning, then select Enabled by pressing the spacebar. 5 Open the Exit menu, then highlight Exit Saving Changes and press ENTER. 6 Select Yes, then press ENTER. The battery recalibration process begins and a screen opens showing you the progress. The entire process will take several hours. When the recalibration has finished, the message "Press [Esc] key to exit" appears. 7 Press ESC. The battery charge indicator now displays an accurate battery charge. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154

Recalibrating the battery(ies)
53
Recalibrating the battery(ies)
Important
Do not interrupt the
battery recalibration
process. If
recalibration is
interrupted, you must
start the process over
again.
Important
If, after completing
this procedure, the
battery charge
indicator still does not
show an accurate
charge, contact
Gateway Customer
Care at the location
shown on the
Customer Care label.
For more information,
see
“Gateway contact
information” on
page 3
If your notebook unexpectedly goes into
Standby mode while you are using it but the
battery charge is not low, you may need to
recalibrate your battery(ies). You should also
recalibrate the battery(ies) periodically to
maintain the accuracy of the battery gauge(s).
To recalibrate the battery(ies):
1
Connect the AC adapter, then turn on your
notebook.
2
As soon as it starts and you see a startup
screen, press
F2
. The BIOS Setup utility
opens.
3
Open the
Advanced
menu.
4
Highlight
Battery Auto Learning
, then
select
Enabled
by pressing the spacebar.
5
Open the
Exit
menu, then highlight
Exit
Saving Changes
and press
E
NTER
.
6
Select
Yes
, then press
E
NTER
.
The battery recalibration process begins
and a screen opens showing you the
progress. The entire process will take
several hours.
When the recalibration has finished, the
message “Press [Esc] key to exit” appears.
7
Press
E
SC
. The battery charge indicator
now displays an accurate battery charge.