HP StorageWorks 2/32 SAN switch 2/32 version 4.0.x installation guide - Page 37
Tighten the screws, and torque to 25 inch-pounds.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing the SAN Switch 2/32 7. Secure each L-bracket and 3-hole bar nut to the rack's rails with two Phillips head 10-32 x 3/8 inch screws (and attached square alignment washers); see Figure 6. . [1] Select this graphic frame. 4 [2] Select File. [3] Select Import. [4] Selec3t File. [5] Choose the appropriate graphic file name. [6] Make sure you've checked the Copy Into Document. [7] Select Import. Position the illustration as required. 2 [8] Adjust the size of the outer graphic frame as required. Delete this set of instructions 1 5 1 Phillips head 10-32 x 3/8 in screw 2 3-hole bar nut 3 Outer slide rail SHR-2478A 4 L-Brackets 5 Power cord clip (1 of 6) Figure 6: Attaching the outer slide rails to the HP 9000 Series rack Note: Remember to position the 3-hole bar nut behind the L-bracket. 8. Tighten the screws, and torque to 25 inch-pounds. SAN Switch 2/32 Installation Guide 37