HP StorageWorks 2/32 SAN switch 2/32 version 4.0.x installation guide - Page 57
Verifying Operation, HP StorageWorks Fabric OS Procedures Version 3.0.x/4.0.x User Guide.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing the SAN Switch 2/32 Figure 15: Inserting a cable into an SFP SHR-2574A Note: The cable is keyed so that it can only be inserted correctly into the SFP. If the cable does not slide in easily, check the orientation. Verifying Operation After making the appropriate connections, as outlined in this chapter, use these steps to verify that the switch is running properly. 1. Access your browser. 2. At the URL address window, type http://your switch IP address. 3. If connected properly, the name of your switch appears (in green) at the prompt, indicating Healthy/OK. Note: Backing up the configuration is strongly recommended. This ensures that a complete configuration is available if required for a replacement switch. For instructions on how to back up the configuration, refer to Chapter 4, "Backing Up Configuration Data and Upgrading Firmware." Or, for more detailed information and commands, refer to the HP StorageWorks Fabric OS Procedures Version 3.0.x/4.0.x User Guide. SAN Switch 2/32 Installation Guide 57